Feeds:
Posts
Comments

Posts Tagged ‘green building northern California’

I was at the 2012 Green Build Conference and trade show (http://www.greenbuildexpo.org/expo/for-attendees) this afternoon, looking for products that will help me create longer-lasting, more energy- and resource-efficient—in a word better—buildings.  Better homes for my clients, better construction projects for the contractors, easier-going on the planet.  (It is, after all, the only planet we’ve got).

My goal in searching out new products/systems is, install once and because the best was in the specifications, the callbacks just don’t happen.  Let the other designers and contractors deal with callbacks.  Our goal is to never have them.  Among the questions I ask:  How long has this particular product been in installed use?   How many installations have you sold?  What sorts of certifications can you provide?  What is its installed cost ratio compared with current industry standard?

The expo floor itself was mammoth, more booths than I recall having seen at any construction industry trade show here in San Francisco.  Usually I can cruise the floor, find and stop to learn about the products that will be useful to me and my clients, and be gone in an hour or so.  Today, three hours later (and I am highly efficient and targeted toward what it is I need) I finally made the last important contact that I had in mind and hit the road.

The most exciting product of the day?  Unico low-diameter FAU systems.  (http://www.unicosystem.com/Home/LandingPages/InteractiveHouseMedia.aspx) high-velocity This is a unified system, so your HVAC installer may be resistant at first, but the installed-costs are comparable (according the rep on hand), and the long term savings remarkable.  My suggestion:  visit their website, give them a call, let them sell you on it as they did me.  They work with first-time installers to get the system in right.

Or maybe it was the puncture-proof underslab vapor barrier that sidesteps all the conflicting information about where does it go and how do you keep it intact while your workers lay the rebar grid?   Try Raven Industries VaporBlock 10 (http://ravenefd.com/products/vaporblock/)

Paint-on sound reduction for existing or new gyp board walls?  Low to zero VOC paints?  Reflective exterior paint solutions that reflect up to 30% of the sun’s heat?  A duct-sealing system that fixes only the leaks, done-in-a-day with before-and-after leakage readouts that give the proof.

Ya gotta be a geek about this stuff.  More on all these issues in future posts.

I would suggest that for all those east-coast homes that just took a beating, since you may have to rebuild some of your systems and may have FEMA money to work with, why not look into rebuilding to a standard that will work to the highest level, if the costs are comparable?  Ask them my questions for yourself, or ask your own, see if you are satisfied with the answers.

Disclaimer:  Just because I recommend something here does not mean I warrant any product or system to operate as indicated.  You make the contact, talk to their reps, get the pitches for yourself, and then decided whether you want to have the best, most efficient projects under your name, or if maybe someone else should take that on.

Advertisements

Read Full Post »

Believe it or not, there are still some people out there who think that global warming is just a great big scare tactic. That we can just keep on business as usual, burning up whatever fossil fuel we need to just to keep comfortable. When wintertime comes, we just turn up the thermostat, live with the fact that some parts of our houses are hot, some cold, some drafty, none of it exactly comfortable. That’s winter, right?

No.

Chances are, your old furnace and poorly designed ductwork are to blame, because once these details are taken care of, comfort in your house in wintertime comes back to stay. Never mind that you might be using less gas and creating less carbon emissions—global warming is a myth, right?

So how about this—house warmer AND you spend, oh ,I don’t know, 25% less of your money heating the great outdoors. Money in your pocket, do you believe in that?

Well, you have to spend some. Not a lot, as dollars go these days, and you’ll get it all back in less than ten years in fuel savings. Maybe less than seven.

Case study by Building Solutions in Redwood City California (where the winters are by New England standards, pretty darn mild). Take an older house, 1850 sf, built before insulation was thought necessary, so there is none in the walls. It has its original 80% efficient gas furnace, and the original ductwork that went with it.

One key to understanding energy efficiency for older homes is the idea of “Test In”, meaning with blower doors and duct blasters, you find out up front where the warm air is leaking out of the forced air system, and through penetrations in the walls and plates. You find those leaks in the walls, and you seal them with spray foam insulation. Simple enough. Then you replace the old ductwork with new sized for delivery, and the old furnace with a new 95% efficient one, also correctly sized (both by the ACCA manuals, more on these later). Then you “Test Out,” for a data-based hard look at the results of the work done.

Results for the case study:
• reduction of heat loss through sealing up air infiltration 11%
• reduction of air leakage from new, well sealed duct system 23%
• reduction of lost heat load 7%
• increase in owner satisfaction with comfort level of house—priceless

This without insulating the walls!  Still don’t believe it?  Contact  Levi Blankenship at BuildingSolutions.com for how they did it.

My point is this: You can do part of an energy-efficiency upgrade, for a relatively low cost—in this case about $5,000—and reap great results. It doesn’t have to be all-or-nothing. Look for a BPI (Building Performance Institute) certified energy efficiency contractor in your area. Call them, see what they think they can do for you.

Or, you can hang an extra sweater by the door of your coldest rooms, and pay more than you have to for gas or fuel oil indefinitely into the future.

Your choice.

© David Hirzel 1/28/10

Read Full Post »

Thinking about adding something to your home—a new deck, a master bedroom addition, or a kitchen remodel? Given today’s bright focus on green building, let’s look at ways to get the same great result using less wood.

The most important thing you can do is plan your project carefully.  No matter how large or small it is, there are plenty of ways to avoid waste.

First, don’t build more than you really need.  If 150 square feet of new room or deck is all you need, why make it any larger?  Yard space for landscaping and recreation is just as important as finished living space, and probably easier to maintain.

As you move on to framing, be aware that some common practices sacrifice trees and energy efficiency, yet add nothing to the strength of the structure. You can use less wood, less time, less money in the framing by not using double trimmer studs and sills at window openings, 4×12 headers at openings in non-bearing wall, three-stud corners. Instead, employ Optimum Value Engineering or OVE and use studs placed at 24” on center rather than the common 16”, single rather than double top plates (bearing walls must have joists and rafters stacked above the studs), two-stud corners, and a variety of other practices. These practices can save up to 30% in lumber expense.

You can also consume less raw wood by working with engineered lumber. Engineered wood is made from small-diameter, fast-growing plantation farms and are usually straighter and stronger than solid-sawn products. Ask for products such as truss joist I-beams (TJIs), parallel-strand lumber (PSLs), oriented-strand board (OSB) and laminated wood products. These manufactured lumber products are all in common use today.

When you do build, build to last.  Most commonly used woods will not stand up well to insects or the weather, and all of them (unless especially treated) are subject to fungus damage when they gets wet and cannot dry out.  It’s critically important to understand which materials to use outdoors, and how important flashing details are where the construction is exposed to rainfall.  A 1” mis-cut at a crucial flashing junction can lead to thousands of dollars worth of damage in only a few years.  Water resistant finishes—paints and penetrating oils—are also important in keeping the wood safe from fungus damage.

There are a lot of manufactured products available now that take the place of, and weather better than, the wood used outdoors just a decade age.  Cement-based siding installs and looks like wood when painted conveys the same look.  There are a variety of composite decking materials that look much the same as, and last much longer than redwood decking.  Vinyl fencing is now available in a variety of styles, and has the added advantage of never needing paint.

Most molding profiles are now available made from plastic with wood veneer, that will cut, stain, finish, and install just like hardwood trims.  Beautiful “engineered” flooring of hardwood veneers comes prefinished and can be installed in much less time than hardwood nailed down strip by strip and sanded and finished in place.

There is a world of new products and techniques out there.  If you take the time to educate yourself in their proper application and installation, you just might help keep some of the trees in the forest, and some of the green in your pocketbook.

David Hirzel is a Green Point Rater and residential building designer serving the Peninsula and the central California coast since 1983.

(First published in San Mateo Times, August 13, 2009)

Read Full Post »

“Things are not getting better. In fact, they are actually getting worse. From 1990 to 1999, global carbon dioxide emissions increased at a rate of 1.1% per year. Then everyone started talking about Kyoto, so we buckled up our belts, got serious, and we showed ’em what we could do: In the years 2000 to 2006, we TRIPLED the rate of global carbon dioxide emission increases, to an average increase of over 3 percent a year! That’ll show ’em we mean business! Hey, look what we can do when we’re serious–we can emit even more carbon faster.” (Nate Lewis, California Institute of Technology, quoted (page 214) in “Hot, Flat, and Crowded” by Thomas L. Friedman)

“Hot, Flat, and Crowded” is the book to read, if you want a deep look into everything that is driving the increase in global energy use and carbon emission. Not a pretty picture, and the choices involve–oh my God!–using less energy, not more. Mostly by being smarter in how we go about it.

Don’t expect your governments to be much help, as long as their decisions are driven by industry lobbyists instead of common sense. Let’s hope Copenhagen’s success doesn’t match Kyoto’s.

Read Full Post »

Why Green? Why Now?

Sometimes it may seem that everywhere you look in the media–now more than ever before–there is some reference to “eco-consciousness” and “green building”. “Global warming” seems to be on everyone’s mind. Rising energy costs hit us all in the pocketbook last year. All of it is news, but the real news, while not as compelling, was made in Sacramento with the passage of “AB32” in 2006. This legislation, the first of its kind in the US, targeted emission reductions from greenhouse gas sources via regulations, market mechanisms and other actions.

The specifics of regulation, at least concerning building and development policies, are best left in the hands of local governments, and local governments all over the Bay Area are taking action. From San Rafael to San Jose, fifteen cities and counties have adopted building policies mandating energy- and resource-efficient design for new construction. More local jurisdictions are jumping on board all the time. Pacifica is considering its own green building ordinance right now, with a goal of formal adoption by late summer 2009.

Keep in mind, “green” is a very big word in this context. It is overused and misused to the point that its true value as a concept has become blurred. BuildItGreen.org, one of the main proponents of this “new” idea, sets out five principles, all of which must be incorporated into residential building design. Energy-efficiency and resource management are two everyone knows. Water conservation is a big issue, but so are healthy homes (indoor air quality), and each homes place in a well-designed community. Taken all together, these principles incorporated into our housing concepts today, will help make a better world for tomorrow.

This column is the first of a series that will help explain “Green Building”, and show how greener, healthier homes can be built or remodeled using simple principles and basic materials, at little or no extra cost.

© 2009 David Hirzel

Read Full Post »